Air/oil separator filters

Flow rates

Air/oil separator filters are available    

for air intake rates from 1-16.5 m3/min

at a compressor operating pressure of

7 bar (0.7 MPa).

 

Pressure drop

The pressure drop at nominal flow rate

and 7 bar (0.7 MPa)

operating pressure is approx. 0.3 bar

(30 KPa) when using a new element.

 

Pressure resistance

Air/oil separator filter housings are designed for operating pressures up to either 20 bar (2 MPa) or 14 bar (1.4 MPa)

(please adhere to the values in the table on page 15).Their integrated filter elements are suitable for differential pressures over 5 bar (0.5 MPa).

 

Filtration efficiency

The residual oil content of the compressed air at nominal flow rate and 7 bar (0.7 MPa) operating pressure is approx. 1-3 mg/m3.

 

Service life

The increase in flow resistance, and thus the element service life, depends on the cleanliness of the oil and the quality of the air cleaner used. A service life of several thousand hours can be achieved with a properly-functioning system.

 

 

 

 

 

 

 

Air/oil separator filters for compressors